PARTHENON (Pre-release version) for
RedHat Linux
(To Japanese page)
(To Spanish page)
PARTHENON RPM package for RedHat
Linux is now available.
- See RPM-HOWTO for
more information about the RPM package and the rpm command.
0. System requirements
- Architecture : Intel i386 family
- Distribution : RedHat Linux 6.2J, 7.1, 7.2
1. Download
Download the RPM package file (parthenon-2.4.1-1.386.rpm[
6.2J,
7.1,
7.2
]).
- This file name stands for "{package name: parthenon}-{version (of
PARTHENON) : 2.4.1}-{release number (of RPM package) : 1}.{architecture :
i386}.{extension : rpm}
- File size is 5476612(6.2J), 3996006(7.1), 3983324(7.2) bytes.
- The license file of this package is valid until May 31, 2002.
2. Installation
- Switch user into root
# su -
Password: (Enter root password)
- Execute rpm command with "-i" option.
# rpm -i parthenon-2.4.1-1.i386.rpm
- Installation is completed if rpm command terminates successfully.
Please remove the downloaded file, which is no longer necessary once you've
installed it.
All files of PARTHENON are installed under "/usr/local/parthenon".
3. Installation of Cell-Libraries (additional)
After installation of "parthenon-2.4.1-1.i386.rpm", you can
download and install the following cell libraries:
Package name |
File size (byte) |
Contents |
pcd-ALTERA-altera-1.0.1-1.i386.rpm
(
6.2J,
7.1,
7.2
)
|
24793, 19256, 19353 |
Cell library for FPGA of ALTERA |
pcd-GATEFIELD-GF100K-1.0-2.i386.rpm
(
6.2J,
7.1,
7.2
)
|
24909, 19907, 19958 |
Cell library for GF100K of GATEFIELD
(*) |
pcd-GATEFIELD-GF250F-1.0.1-1.i386.rpm
(
6.2J,
7.1,
7.2
)
|
27567, 21772, 21845 |
Cell library for GF250F of GATEFIELD
(*) |
pcd-NEC-cmos9-1.0-2.i386.rpm
(
6.2J,
7.1,
7.2
)
|
94540, 83116, 83200 |
Cell library for CMOS9 of NEC |
pcd-XILINX-lca-1.0-2.i386.rpm
(
6.2J,
7.1,
7.2
)
|
22726, 18052, 18098 |
Cell library for FPGA of XILINX |
Please install them as follows:
- Switch user into root
# su -
Password: (Enter root password)
- Execute rpm command with "-i" option.
# rpm -i cell_library_package_name
- Installation is completed if rpm command terminates successfully.
- You cannot install these libraries before installation of "parthenon-2.4.1-1.i386.rpm"
package.
- These two cell libraries use active-low reset.
4. Post installation process
Add the path name where PARTHENON executable files are installed to your
search path.
- Born shells (The default shell is "bash" in most of major Linux
distributions. So this setting will be useful.)
# PATH=/usr/local/parthenon:${PATH}; export PATH
- C shells
% set path = (/usr/local/parthenon/com $path); rehash
5. Update of the password file (at the expiration of the term of validity)
At the expiration of the term of validity of license, please update the
password file.
- Download the new password file (parthe.non) from this
web site.
- Switch user into root.
# su -
Password: (Enter root's password)
- Copy the downloaded password file.
# cp parthe.non /usr/local/parthenon/com/parthe.non
Update is completed.
6. Un-installation (Removal)
- Switch user into root
# su -
Password: (Enter root's password)
- Execute rpm command with "-e" option
# rpm -e parthenon-2.4.1-1
- Un-installation is completed if rpm command terminates successfully.
For more information
Please send to here
if you have any suggestion, remark or report etc.
More information about PARTHENON
Homepage